This machine has the advantages of cutting speed, cutting precision, fully automated, with a variety of pressure line function, is the more advanced ultrasonic cutting machine, cut 500pcs per minute The Machine core parts materials are all imported materials durable, stable performance. Ultrasonic trademark Shearing machine cutting characteristics of the incision is flat, soft, not burr, not scattered side, not yellow, not coke, not hard. The machine has a variety of advanced features such as a variety of pressure line function, waste, static elimination function. Machine cutting speed is the traditional cutting machine can not be compared, cut to 500pcs per minute with optical eye tracking error in time to correct.
Ultrasonic cutting machine parameters:
Ultrasonic frequency: 20KHz
Cutting width: 1-70mm
Cutting length: 1-1000mm
Cutting speed: 500pcs / min (6cm long as an example)
Power supply: 220V / 2KW
Rhithers. Find roundsy walks.aders wanted to calling composition wanted outcome Results
Dimensions: 700 * 900 * 1560mm
Ultrasonic shear principle:
Ultrasonic Marking Marking Machine The use of ultrasonic vibration friction moment of instantaneous heat generated by the principle of mold or cutter in the motor bias axis up and down when the contact with the ultrasonic energy mold vibration surface, making the trademark or ribbon was instantly cut off, because the ultrasonic velocity So that the incision is very soft and smooth and has the role of sealing.
Product Features:
• The machine has a dual operating mode, chasing the color cut mode with the normal fixed length cutting mode.
• Fast: 500 pieces / min (for 50mm length)
• High precision: matching original imported photoelectric sensor, automatically detect and correct the error, to ensure that the cutting length and quantity of precision.
• Scope of application: cut off and need to keep flat and not scattered, not yellow, do not wear a variety of trademarks and ribbon.
• Section formation: The cutter is made of imported high speed steel and ultrasonic steel die to ensure smooth cutting and no burrs.
Microcomputer control: with a variety of ribbon trademark cut the practical function, such as pressure line waste and so on.
• Automatic Count Pause: Set a certain number Once the system is cut, the system will automatically stop and alarm.
• Memory function: Automatically stores and memorizes the number, length, and parameters set after power is lost.
Very high performance and speed is your wise choice to increase production efficiency and reduce production costs for production time!